Skip to content
Lab
optics workbench sellmeier dispersion · fresnel · polarization · diffraction

Laser Lab

Place prisms, lenses and windows made of real catalogue glasses (N-BK7, F2, N-SF11, fused silica, CaF₂ …), plus mirrors, gratings and polarization optics, on a 240 × 150 mm table. A polarization ray tracer follows both the reflected and the transmitted ray at every surface. Find the angle of minimum deviation, the focal shift of a singlet against an achromat, Brewster’s angle and the critical angle for yourself.

Detectors record power, spectrum, irradiance profile and degree of polarization, and a power ledger accounts for every watt that leaves the source (detected, absorbed, escaped, ghosts) to about 10⁻¹⁴. Wavelength and rotation sweeps run in a Web Worker.

Benches
rays 0 trace 0.0 ms Σ CLOSED
Optical table · 240 × 150 mm ray colour = λ ghost < 5% glass detector

selected—
θi → θt—
n1 → n2—
Rs / Rp—
deviation δ—
on detectors—

drag: move · round handle: rotate (Shift: 15° snap) · arrows: 0.5 mm (Shift 5 mm) · [ ]: ±0.1° (Shift ±1°) · Delete: remove · readouts at λref 587.6 nm

Loupe
Detectors irradiance along detector [mm] spectrum [nm]
Measurements
DetectorPowerof sourceλ̄centroidRMSs : pDOP
Power ledger where every ray ends up
Sweeps queued

Dispersion · Sellmeier

n2(λ) − 1 = Σi=13 Biλ2 / (λ2 − Ci)

Vd = (nd − 1) / (nF − nC)

GlassndVdθBθc
Interfaces · Snell & Fresnel

n1 sin θi = n2 sin θt

rs = (n1cos θi − n2cos θt) / (n1cos θi + n2cos θt)

rp = (n2cos θi − n1cos θt) / (n2cos θi + n1cos θt)

R = |r|2, T = 1 − R · tan θB = n2/n1 · sin θc = n2/n1

Every glass surface spawns both a reflected and a transmitted ray (non-sequential). Under TIR cos θt becomes imaginary, |r| = 1 and s and p pick up different phases. Ghosts weaker than 2×10⁻⁴ of their primary ray stop and are booked as cutoff.

Diffraction & polarization

sin θm = sin θi + mλ/Λ

ηm = sinc2(m − λB/λ) (thin blazed grating)

E = (Ep, Es), p̂ = ẑ × k̂, ŝ = ẑ

Jpol = â âT + 10−2 b̂ b̂T, Jwp = â âT + eiΓ b̂ b̂T, Γ = 2πw·λ0/λ

The table is the plane of incidence everywhere, so s and p are global. Unpolarized light is traced as two incoherent orthogonal halves; detectors accumulate Stokes vectors to report the degree of polarization.

What is modelled

The physics behind every ray

Refractive indices come from Schott and Malitson Sellmeier coefficients at each wavelength; nd and the Abbe numbers match the catalogues to 10⁻⁴. Every surface applies Snell’s law and the Fresnel coefficients (s and p separately, with the complex phase under TIR) to spawn reflected and transmitted rays, and polarization is carried as a Jones vector. Lenses are thick lenses with real spherical surfaces. The BK7/F2 achromat (f = 100 mm) was designed with this engine: F and C share a focus, and the bending minimises spherical aberration. Gratings follow the grating equation with a blazed efficiency of sinc²(m − λB/λ).

BK7 n_d
1.51680
δmin SF11 60°
66.34°
singlet F−C
1.53 mm
achromat F−C
≈ 34 µm
Simulation scope

What is simplified

Rays stay in the plane of the table (meridional 2D geometric optics), so skew rays, astigmatism and diffraction-limited spots are out of scope. Rays add incoherently: there are no interference fringes or thin-film coatings, and mirrors, splitters, the PBS and polarizers are idealised thin elements with a reflectance or extinction ratio. Grating efficiency uses the thin scalar approximation, waveplates are zero-order plates without birefringence dispersion, and air is taken as n = 1.